How to clean and maintain injection molded shoes?

1、 Clean with toothpaste

The simplest way to clean the plastic part of your shoes when it is covered with dirt is to use toothpaste. Please follow the following steps for cleaning:

1. Apply some toothpaste to the dirt on the shoes.

2. Gently wipe the dirty part with a brush until the dirt is completely removed.

3. Use a damp cloth or sponge to wipe the surface of the shoes, ensuring that the remaining toothpaste is wiped clean.

4. Place the shoes in a well ventilated area to dry.

2、 Clean with vinegar and water

Vinegar can be used to reduce the stickiness of dirt on plastic. Follow the steps below to clean:

1. Mix one part of white vinegar with two parts of water to make a cleaning solution.

2. Apply this mixture to the plastic parts of the shoes.

3. Use a damp cloth or sponge to wipe the shoes and ensure that all areas on the surface of the shoes are cleaned.

4. Wipe the surface of the shoes with water to ensure that the vinegar is wiped clean.

5. Place the shoes in a well ventilated area to dry.

3、 Clean with soap and water

Soap and water are also good ways to clean the plastic parts on shoes. Follow these steps:

1. Add some mild soap to clean water.

2. Apply this mixture to the plastic parts of the shoes.

3. Use a damp cloth or sponge to wipe the shoes and ensure that all areas on the surface of the shoes are rinsed.

4. Wipe the surface of the shoes with water to ensure that the soap is wiped clean.

5. Place the shoes in a well ventilated area to dry.

The above are three methods for cleaning plastic on shoes. When using the above methods, please ensure that the cleaning method is suitable for the material of your shoes. When cleaning, gently wipe and avoid using overly strong chemicals on the plastic to prevent damage to the shoes.